SK ELECTRONICS Thermo-FID PT

Technical specifications for the Thermo-FID PT

Ambient temperature: +5 to 40 °C

Dimensions: 380 mm x 155 mm x 380 mm

Weight: 11 kg (15 kg including bottle holder)

Humidity <90% at +20°C, <50% at +40°C, no condensation

Protection rating IP40

Sampling system Injectors

Measurement ranges VOC: 10,000 ppm

CH₄: 3,000 ppm

Detection temperature 140°C–190°C

Power supply 230 V / 115 V ±10%, 48 Hz to 62 Hz, < 500 W

Recommendations for use Clean hydrocarbons and PM 10 aerosols = 10 μg/m³

The use of synthetic air is strongly recommended for this application!

Ventilation: 80 m³/h without resistance

- Two analysis channels

- Portable or rack-mountable format

- Sampling gas distribution via ejectors using ambient air or an internal diaphragm pump.

The Thermo-FID is used in a variety of applications across all types of industries, from environmental protection to Research and Development. Applications range from LEL monitoring and emissions monitoring to analytical exhaust gas monitoring for the chemical industry and in the field of engine development. The FID’s electronic system enables several additional functions. The integrated processor enables controlled operation as well as automatic self-monitoring and system fault analysis. The alphanumeric display shows various operations and functions. The instructions are in plain text, which makes maintenance easier.