SIGNAL S4 SOLAR XPLORE : Analyseur FID de COV portable et chauffé

Measurement method: Flame ionisation detector

Units of measurement: PPM or mg (user-selectable)

Measurement ranges: Range A: 0–1000 ppm.

User-adjustable, e.g. 0–1 ppm, 0–5 ppm,

0–10 ppm, 0–50 ppm, 0–100 ppm, 0–500 ppm, 0–1000 ppm.

Resolution: 0.01 ppm

Range B: 0–10,000 ppm.

User-adjustable, e.g. 0–10 ppm,

0–50 ppm, 0–100 ppm, 0–500 ppm, 0–1000 ppm,

0–5000 ppm. 0–10,000 ppm.

Resolution: 0.1 ppm

Range C: 0–100,000 ppm.

User-adjustable, with a resolution of 1 ppm

Response time: THC <1.5 sec

CH₄ and NMHC <2.5 seconds

Repeatability: <1% FSD

Oxygen effect: <2% of the reading from

0% to 21% O₂ (H₂He)

Linearity: ± 0.5% FSD or 2% of the point

EN14181 - dc rel: <0.5

R²: >0.99

Drift: ± 0.2 ppm or 2% of the range per week, whichever is higher.

Noise: +/-0.1 ppm or 1% of the range, whichever is greater.

Temperature effect on zero: <0.15% per °C

Temperature effect on span: <0.3% per °C

Sample inlet pressure: With internal sampling pump:

-0.6 to +0.4 bar

Without internal sampling pump:

+0.2 to +0.5 bar

Accuracy: <0.2% FSD

Precision: <1%

Detection limit: 0.05 mgC/m³

Bypass flow sensitivity: Less than 2% of 1 to 3 l/min

 

Sample filter: Removable 0.4-micron PTFE

7-micron stainless steel filter

Non-removable stainless-steel filter for CFID

Display: Fixed or detachable screen

Sample conditions: 0–200°C (heated version)

0–80°C non-condensing for CFID

Gas flow rate: Single detector:

35 ml/min H₂ or 180 ml/min H₂He

Dual detectors:

70 ml/min H₂ or 360 ml/min H₂He

Air supply: Single detector:

>1.1 L/min

Dual detector:

>1.6 L/min

Operating conditions: 5–40°C ambient temperature

Outputs: 0–10 Vdc

RS232

Ethernet

TCP/IP

4–20 mA (optional)

Power requirements: 100–250 Vac

24 Vdc (optional)

600W max

Remote control: AK protocol

Ethernet

Supplied with S4i operating software.

Dimensions and weight: 19" (W) x 133.5 (H) x 530 mm (D)

Approx. 22 kg

Protection rating: IP 55

Flexible:

Single or dual detectors

Integrated zero air generator

Software suite for use over Ethernet

Integrated heated line controller

Easy to use:

Robust and portable

Wireless interface for tablet

Typical warm-up time of 30 minutes

IP55

Accurate:

Precision monobloc heated FID.

Simultaneous monitoring of THC, NMHC and methane.

Fast response time.

Complies with standard EN12619.

Flame ionisation detector (FID) for the discontinuous measurement of the mass concentration of gaseous and vapour-phase organic substances in emissions from stationary sources.