JCT JH3FG & JH3FGR : Lignes échantillon chauffées, tresse de protection PA

Temperature-controlled heating up to a maximum of 200°C.

- Outer jacket made of flexible polyamide protective braiding.

- Thermal insulation made of silicone foam.

- Ready to use.

- Highly flexible.

- Interchangeable inner core for JH3FGR.

- Second core for, for example, optional calibration gas.

- Optional integrated temperature controller.

- Inner core reinforced with stainless steel braiding.

Model JH3FG / JH3FGR

Description: Regulated heated sampling line

Outer protective sheath: Polyamide braiding, black

Inner core: Fixed, interchangeable

Application: Mobile and stationary installation, indoors and outdoors

 

Operating data
Operating temperature: max. 200°C.

Operating pressure: max. 10 bar.

Ambient temperature*: -30°C to +60°C

Build

Inner core material: PTFE, optionally PFA

Heating element: DIN-compliant design, moisture-proof with protective braiding

Thermal insulation: Closed-cell, moisture-proof, thermally stabilized silicone tubing

End configurations: Hard caps or silicone caps

Maximum sampling line length*: 50 m

Outer diameter of the sampling line: DN 4/6 mm / 42 mm ± 3 mm, DN 6/8 mm / 42 mm ± 3 mm, DN 4/6 mm / 42 mm ± 3 mm, DN 6/8 mm / 48 mm ± 3 mm

Minimum bend radius JH3FG / JH3FGR: DN 4/6 mm: 50 mm / 100 mm, DN 6/8 mm: 75 mm / 120 mm

Dimensions of silicone caps [mm]: DN 4/6: L = 88, Ø 50 (H), Ø 70 (C), DN 6/8: L = 88, Ø 50 (H), Ø 70 (C)

Dimensions of PA plugs [mm]: DN 4/6: L = 111, Ø 50 (F), Ø 75 (A), DN 6/8: L = 111, Ø 50 (F), Ø 75 (A), DN 4/6: L = 111, Ø 50 (F), Ø 75 (A), DN 6/8: L = 120, Ø 54 (F), Ø 79 (A)

Protection class: IP 44 (EN60529)

Electrical

Power supply: 230 VAC 50/60 Hz or 115 VAC 50/60 Hz

Power consumption: 100 W/m

Connection cable: 3 m

Connection plug: 7-pin plug for connecting HT-43 and HT-55 temperature controllers

HANQ8 plug for connecting the HT-41 temperature controller

Integrated HT 54 temperature controller option

Installation location: Directly on the end of the hard cap

Power supply: 230 VAC 50 to 60 Hz / 115 V 60 Hz

Switching capacity: max. 1000 W / 5 A (max. 10 m at 230 V and 5 m at 115 V)

Temperature range: 0°C to 254°C, adjustable in 2°C increments using a DIP switch

Temperature sensor: PT 100

Housing material: Glass-reinforced PA

Protection class: IP 42

Optional sealing: IP 65 (fixed temperature setting)

- No condensation, no freezing.

- Small bend radius possible.

- Excellent thermal insulation.

- Optimal heat dissipation.

- Custom configurations.

- Easy replacement of the inner core (JH3FGR).

- Long service life, even in portable applications.

- Kink protection.

- Exhaust gas analysis.

- Emissions and process monitoring.

- Transport of the gas sample from the sampling point to the analysis system.

- To remain safely above the acid dew point.

- Protection against measurement tampering and freezing.

- Indoor and outdoor use.

- Suitable for portable systems.