Détecteur Radon

• ● Operating technology: Pulsed ionisation chamber and microprocessor

  ● Supply voltage 9 to 15 VDC

  ● Maximum current consumption ±85 mA–95 mA in standalone mode, relay ON

  ● Measurement range 14–3,700 Bq/m³

  ● Accuracy ±37 Bq/m³

  ● Optimal stabilisation time for measurement: approximately 1 hour

  ● Data reading and storage frequency: Every 10 minutes in Mode 1, every hour in standalone Mode 2

  ● Data storage Up to 1 year

  ● Data output and memory Via micro-USB + software supplied

  ● Operating range 10°C–40°C – RH < 70%

  ● Recommended operating height Between 1.50 m and 1.80 m above the floor

  ● Coverage Approximately 20 m² to 30 m²

  ● Cable type Shielded 4-wire cable: 2 x 1.5 mm², 2 x 0.8 mm², twisted pair

  ● Weight ± 400 grams

  ● Dimensions 90 x 110 mm cylinder without bracket

This radon detector, which displays readings in Bq/m³, can operate automatically in two ways:

Mode 1: Addressable, capable of measuring radon concentrations in real time and triggering appropriate actions via the building’s ventilation control unit, with the ability to activate 3 operational outputs at up to 3 different levels.

Mode 2: Standalone, with a relay output to activate an extractor fan at a predefined level. It features a 2.4 MHz Wi-Fi Bluetooth connection, which allows you to programme the device, view graphs and retrieve data from the measurements taken.
It is supplied with a support bracket, which is required for it to function properly and is separate from the wall.