BUHLER Refroidisseur de gaz Série RC 1.1

● Operational readiness: After max. 15 minutes

● Nominal cooling capacity (at 25 °C): 360 kJ/h

● Ambient temperature: 5 °C to 50 °C

● Gas outlet dew point, preset: approx. 5 °C

● Static dew point variation: ± 0.1 K

● Across the entire specification range: ± 1.5 K

● Protection class: IP 20

● Housing: Stainless steel

● Packaging dimensions: Approx. 420 x 440 x 350 mm

● Weight with heat exchanger: Approx. 16.0 kg

● Mains connection: 115 V, 60 Hz or 230 V, 50/60 Hz ± 5%, Plug to DIN EN 175301-803

● Electrical data 230 V 115 V, Typical power consumption: 396 VA 402 VA, Max. operating current: 2.5 A 5 A

● Switching capacity Alarm output Max. 250 V, 2 A, 50 VA, Connection socket to DIN EN 175301-803

● Installation: Free-standing or wall-mounted

● Ambient temperature: 0 °C to 60 °C

● Flow rate: 0.3 l/h (50 Hz) / 0.36 l/h (60 Hz) with standard hose

● Vacuum inlet: max. 0.8 bar

● Inlet pressure: max. 1 bar

● Outlet pressure: 1 bar

● Hose: 4 x 1.6 mm

● Condensate outlet: Connection for Ø6 mm hose, 4/6 mm (metric) threaded connection, 1/6“-1/4“ (inch)

● Protection rating: IP 40

● Hose materials: Norprene (standard), Marprene, Fluran

● Connections: PVDF

● Signal: 4–20 mA or 2–10 mA, corresponding to a cooler temperature of -20°C to +60°C

● Connections: M12x1 connector, DIN EN 61076-2-101

● Signal: Modbus RTU (RS-485)

● Connections: M12x1 connector, DIN EN 61076-2-101

● Ambient temperature: 3°C to 100 °C

● Max. operating pressure with filter: 4 bar

● Filter area: 125 cm²

● Filter fineness: 2 μm

● Dead volume: 108 ml

● Material

● Filter: PVDF, Duran glass (parts in contact with fluids)

● Seal: Viton

● Filter element: Sintered PTFE

● Ambient temperature: 3°C to 50°C

● Max. operating pressure with FF-3-N: 2 bar

○ Materials: PVDF, PTFE, epoxy resin, stainless steel 1.4571, 1.4576

● Compact design: Pre-assembled and ready to connect

● One or two gas channels

● Heat exchanger made of stainless steel, Duran glass or PVDF

● Adjustable outlet dew point and alarm thresholds

● Cooling unit temperature display

● Status display and status output

● Nominal cooling capacity 360 kJ/h

● Constant dew point stability ± 0.1 °C

● Optional 4–20 mA signal output or Modbus RTU

● Optional humidity sensor, filter and condensate pump

● Successor to the EGK 1/2 and EGK 1SD